Power 110 Brushless Outrunner Motor, 295 kV
Equivalent to or surpassing the power of a 110-size 2-stroke glow engine for 915-lb (46.8 kg) airplanes
Ideal for 3D airplanes up to 11 lb (5 kg)
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount and mounting hardware
High-quality construction with ball bearings and hardened 8mm steel shaft
Includes two 12mm prop shaft adapters tapped out for 1032 threads
Ideal for models requiring up to 2000 watts of power
External rotor design for better cooling
The Power 110 is designed to deliver clean and quiet power equivalent to or surpassing the power of a 110-size 2-stroke glow engine for sport and scale airplanes weighing 9- to 15-pounds (4- to 6.8-Kg), 3D airplanes up to 11-pounds (5-Kg), or models requiring up to 2000 watts of power.
It will provide excellent performance in the new Hangar 9 FuntanaX 100 ARF or ShowTime 4D 90 ARF. The Power 110 provides perfect power for the Ultra Stick Lite 120 ARF.
Maximum operating temperature: 220 deg Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.
You will need...
85A HV Brushless ESC
8S- 9S Li-Po or 24 - 32 Cell Ni-MH/Ni-Cd
17x8 to 19x10
Type: Brushless Outrunner
Size: Equivalent to or surpassing the power of a 1.10 size 2-sroke glow engine
Bearings or Bushings: Ball Bearings
Wire Gauge: 13
Recommended Prop Range: 17x8 to 19x10
Voltage: 28.2 - 38.4
RPM/Volt (Kv): 295
Resistance (Ri): .03 ohms
Idle Current (Io): 1.20A @ 10V
Continuous Current: 55A
Maximum Burst Current: 65A (15 sec)
Cells: 24-32 NiMh/NiCd or 8s-9s LiPo
Speed Control: 85A High Voltage Brushless
Weight: 490g (17.5 oz)
Overall Diameter: 63mm (2.50 in)
Shaft Diameter: 8mm (.3 in)
Overall Length: 54mm (2.10 in)
